RaspberryPi
[ Пред. ] [ Содержание ] [ След. ]
RaspberryPi
Created Среда 07 Февраль 2018
INSTALLING OPERATING SYSTEM IMAGES ON LINUX
https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
config.txt Options
https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
dd bs=4M if=2018-03-13-raspbian-stretch.img of=/dev/sdX conv=fsync
unzip -p 2018-03-13-raspbian-stretch.zip | sudo dd of=/dev/sdX bs=4M conv=fsync
Выход UART на контактах GPIO
По умолчанию передающие и принимающие выводы UART находятся на
GPIO 14 и GPIO 15 соответственно, которые являются выводами
8 и 10 в заголовке GPIO
Мониторинг температуры
vcgencmd measure_temp
cat /sys/class/thermal/thermal_zone0/temp
Wi-Fi NANO Card для Raspberry Pi
http://www.avislab.com/blog/raspberry-pi-wifi_ru/
Метеостанция на Raspberry Pi своими руками
http://www.avislab.com/blog/raspberry-pi-meteo_ru/
Загрузчик BerryBoot
http://raspberrypi.ru/blog/626.html
https://www.berryterminal.com/doku.php/berryboot
Инструкции/Ссылки
http://4pda.ru/forum/index.php?showtopic=308317&st=7300
[PI-SDR] Raspberry PI 3 + 7″ Touchscreen + RTL-SDR + GQRX
http://gqrx.dk/blog/pi-sdr-raspberry-pi-3-7-touchscreen-rtl-sdr-gqrx
Установка Webmin
http://dmitrysnotes.ru/raspberry-pi-3-ustanovka-webmin
Radio Frequency transmitter software on Raspberry Pi - rpitx
https://github.com/F5OEO/rpitx
https://groups.io/g/rpitx
https://github.com/ha7ilm/rpitx-app-note
https://www.locked.de/how-to-install-tvheadend-on-a-raspberry-pi/
How to install TvHeadend on a Raspberry Pi
Tvheadend is a TV streaming server and recorder for Linux. It also offers a great possibility to combine a SAT-recorder with KODI mediacenter on a Raspberry Pi (I would recommend a raspberry Pi 3 due to RAM requirements).
Installing Tvheadend by compiling from source was not so easy, so it is definately easier to install via precompiled packages. In order to do so, the following steps are required:
Just go to https://tvheadend.org/projects/tvheadend/wiki/AptRepository, choose the right distribution (xenial for ARM) build type & version (release-4.2, stable4.2, unstable), add the according repo and install tvheadend!
echo "deb https://dl.bintray.com/tvheadend/deb xenial stable-4.2" | sudo tee /etc/apt/sources.list.d/tvheadend.list
sudo apt-get update
sudo apt-get install tvheadend
If a libssl1.0.0 error occur, libssl needs to be installed with the correct version. In my case this had to be done manually – and it seemed to be a very common error.
wget http://ftp.us.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.2l-1~bpo8+1_armhf.deb
sudo dpkg -i libssl1.0.0_1.0.2l-1~bpo8+1_armhf.deb
sudo apt-get install tvheadend
Raspberry Pi lirc_rpi - (IR Remote control) LIRC GPIO driver
http://aron.ws/projects/lirc_rpi/
Raspberry Pi и датчики влажности DHT
https://kropochev.com/?go=all/raspberry-pi-and-humidity-sensor-dht/
Raspberry Pi и OneWire датчики
https://kropochev.com/?go=all/raspberry-pi-and-onewire-sensor/
Pi Temperature Sensor
https://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/temperature/
READ DHT11/22 TEMPERATURE & HUMIDITY SENSOR FROM RASPBERRY PI
http://www.uugear.com/portfolio/read-dht1122-temperature-humidity-sensor-from-raspberry-pi/
http://www.uugear.com/portfolio/dht11-humidity-temperature-sensor-module/
